學生海報競賽注意事項

  • Participants are required to print their own posters.
    請自行列印海報攜帶至會場。
  • Please post your poster on the designated poster board according to the assigned number.
    請依照指定編號張貼於對應的海報版。
  • Please remain at your poster during the display and presentation period.
    展示與發表期間請保持在場。
  • Please remove your poster after the session.
    會後請記得自行取回海報。
  • All posters must be prepared using the official template provided by the conference (please refer to the template on the conference website).
    一律使用大會提供之範本進行海報製作(請參閱官網之海報競賽與發表投稿)。
  • 壁報尺寸:A0 直式,寬 841mm x 高 1189mm
    Poster size: A0 Portrait, (w) 841 mm x (h) 1189 mm

時間:13:20 ~ 17:00
地點:工程五館 B1 大廳

(評審時段為 15:20 ~ 16:50,請務必在場解說)

論文編號

(張貼位置)

論文名稱 (作者)

022

(A-01)

Suppression of downwash jet flame in crossflow using acoustic excitation

(Chung Yu Hsiao*, Ping Yen Hsieh, Ching Min Hsu)

038

(A-02)

工業級甲烷/氨氣燃燒爐於不同燃燒策略之減排特性研究

(黃郁傑、盧君豪、伍芳嫺*、吳明勳)

049

(A-03)

Developing a skeletal RP-1 chemical kinetic mechanism for CFD in liquid rocket engines combustion chamber

(Yi-Cheng Liu, Kuang C. Lin*)

052

(A-04)

結合生質物蒸氣氣化與燃燒於單一流體化床之研究

(陳冠邦*、簡浚珈、張智皓、吳柏穎)

053

(A-05)

甲烷混氫燃燒系統之開發研究

(陳冠邦*、王暐喆、林紀寬、伍芳嫺、林顯宗)

062

(A-06)

利用直接堆疊多孔奈米碳球殼及聚合物改質製程優化HT-PEMFCs之三相界面

(衛彥廷、林晉賢、陳賜原、曾重仁*)

065

(A-07)

以脈衝雷射熱裂解法合成鎳鉬合金觸媒及其於高效非貴金屬陰離子交換膜水電解之應用

(曾彥蓉、林晉賢、曾重仁*)

072

(A-08)

固體火箭發動機之聲渦耦合燃燒不穩定分析

(魏廷凱*)

073

(A-09)

Confined Space Combustion of Al/CuO Nanothermite Meshes with PPh3-Passivated Aluminum

(Xing-Rung Lu, Ming-Hsun Wu*, Ying-Shou Cheng, Chao-Wei Huang)

089

(A-10)

地熱儲集層耦合雙級渦輪之單閃發系統長期性能影響研究

(陳采羚、陳業彤、謝瑞青*)

090

(A-11)

有機朗肯循環系統之單作動旋葉與渦卷膨脹機性能比較

(林承甫、謝瑞青*、蔡賢達)

091

(A-12)

An Optically Accessible High-Pressure Spray Combustion Facility for Flame Diagnostics and Species Measurement

(Yi-Hao He, Ming-Hsun Wu*)

092

(A-13)

應用代理模型探討史特林引擎甲醇噴霧燃燒之最佳化

(陳暐、陳文立、吳志勇*)

093

(A-14)

Nanosecond Repetitively Pulsed Discharges and Their Effects on Ignition of a Non-Premixed Jet Flame

(梁晏誠、陳冠澧、廖英皓*)

097

(A-15)

Investigation of the Effects of Phase Change Materials with Various Melting Points and Fin Geometries on Heat Source Temperature Using Stefan Number

(J.S. Huang*, H.Y. Chung, X.W. Wang, P.Y. Liu)

Organized by

The Combustion Institute of R.O.C.

National Yang Ming Chiao Tung University

Co-organized by

Engineering & Technology Promotion Center

Architecture and Building Research Institute

Hosted by

Institute of Space Systems EngineeringDepartment of Mechanical EngineeringFrontier Science Technology and System Academic Research Center

Contact

  • 國立陽明交通大學太空系統工程研究所

    Tel: 03-5712121 ext. 55240

  • Email: ncce2026@nycu.edu.tw